Preparation of Fe−Co−LDH/MXene modified electrode for sensitive determination of arsenic (III) in aquatic system

3-dimensional (3D) Fe−Co−LDH/MXene composite was synthesized by in-situ synthesis and assembly of Fe−Co−LDH rod around MXene under hydrothermal condition. Due to the unique 3D configuration and good conductivity, the obtained Fe−Co−LDH/MXene modified glassy carbon electrode (Fe−Co−LDH/MXene/GCE) showed excellent electrochemical activity for As(III) detection. Via square-wave anodic stripping voltammetry, the response current on Fe−Co−LDH/MXene/GCE had good linear relationship with As(III) concentrations (1∼1000 ppt) with superior sensitivity (0.22 μA ppt⁻¹ cm⁻²) and low detection limit (0.9 ppt). The mechanism of As(III) adsorption was demonstrated. The electrode showed excellent anti-interference ability. Real water sample analysis demonstrated the Fe−Co−LDH/MXene/GCE was deployable in aqua-system.     

Immunoassay based on peroxidase silver conjugate for the determination of human immunoglobulins against tick-borne borreliosis (lyme disease) by voltammetry and spectrophotometry

In this work two strategies for the synthesis of peroxidase silver conjugates for the qualitative and quantitative determination of immunoglobulins (IgG) to ixodid tick-borne borreliosis (ITBB) (Lyme disease) in human serum were proposed. The first approach for Ab-HRP@AgNP conjugate synthesis involved silver nanoparticles (Ag NPs) capped with a commercial peroxidase conjugate (Ab-HRP) by passive adsorption. The second strategy was based on the initial coupling of Ag NPs with human anti-species antibodies (Ab) by passive adsorption followed by the introduction of horseradish peroxidase (HRP) enzyme into the reaction mixture as a blocking reagent for Ab@AgNP@HRP conjugate synthesis. The formation of peroxidase silver conjugates was proved by UV/Vis spectroscopy and Transmission Electron Microscopy (TEM). The catalytic activity of Ab-HRP@AgNP and Ab@AgNP@HRP conjugates was evaluated by Michaelis-Menten kinetics. A commercially available 96-well microtiter plate with recombinant antigens to ITBB was used as a platform for immobilization of analyzed IgG. The HRP in Ab-HRP@AgNP conjugate was found to retain a sufficient level of activity for interaction with the H₂O₂ substrate to form an intensely colored reaction product. Therefore Ab-HRP@AgNP conjugate can be used in enzyme-linked immunosorbent assay (ELISA) with spectrophotometric detection of 3,3’,5,5’-Tetramethylbenzidine (TMB Ox) for quantitative determination of IgG to ITBB in human serum in the concentration range 12.5–800 ng ml⁻¹ with LOD 2 ng ml⁻¹. Ab@AgNP@HRP conjugate is recommended for the electrochemical determination of IgG to ITBB in human serum at LOD 3 ng ml⁻¹ with registration of silver oxidation by linear sweep anodic stripping voltammetry (LSASV). Ag NPs in Ab-HRP@AgNP and Ab@AgNP@HRP conjugates do not change electrochemical activity during storage and can be used as an electrochemical label in LSASV method in case of HRP inactivation. The immunoassay based on peroxidase silver conjugates expands the analytical potential for the determination of IgG to ITBB especially during the period of increasing incidence.     

Electrochemical sensing of heavy metals in biological media: A review

Trace metals are required in the body as they play a significant role in several biochemical processes. Moreover, certain heavy metals are beneficial at appropriate levels. Copper (Cu), for example, is essential for red blood cell formation, bone strength, and infant growth. Despite these fundamental roles, Cu can become toxic at high levels. Other heavy metals such as lead (Pb), cadmium (Cd), manganese (Mn), and mercury (Hg), have been identified to cause acute and chronic health complications. For these reasons, rapid, real-time quantification of such metals in biological media is of interest to improving human health outcomes. Electrochemical methods offer numerous advantages, such as portability, capability to be miniaturized, low cost, and ease-of-use. In this review, we examine recent developments in electrochemical sensing for the detection of heavy metals in biological media. To meet the requirements for inclusion in this review, the electrochemical sensor must have been evaluated in biological media (blood, serum, sweat, saliva, urine, brain tissue/cells). Several applications are explored to examine recent advancements in electrochemical sensing within these matrices. Addressing the challenges through materials, device, and system innovations, it is expected that electrochemical sensing of heavy metals in biological media will facilitate future diagnoses and treatments in healthcare.     

Highly Sensitive Electrochemical Immunosensor Based on Mesoporous PdPt Nanoparticles Anchored on a Three-dimensional PANI@CNTs Network as Nanozyme Labels

In this study, a novel strategy to amplify electrochemical signals by mesoporous PdPt nanoparticles with core-shell structures anchored on a three-dimensional PANI@CNTs network as nanozyme labels (PdPt/PANI@CNTs) was proposed for the sensitive monitoring of α-fetoprotein (AFP, Ag). First, the mesoporous PdPt nanoparticles prepared by a facile chemical reduction method had excellent biocompatibility with biomolecules, which could capture a large amount of AFP-Ab₂ (Ab₂) and exhibit plentiful pores to entrap more thionine (Thi) into mesoporous PdPt nanoparticles with enhanced loading and abundant active sites. Furthermore, the resulting mesoporous PdPt nanoparticles were abundantly dotted on the surface of a three-dimensional PANI@CNTs network with excellent conductivity and a high specific surface area through the bonding of the amino group to form PdPt/PANI@CNTs nanozyme labels. Most importantly, the as-prepared PdPt/PANI@CNTs nanozyme labels exhibited unexpected enzyme-like activity towards the reduction of hydrogen peroxide owing to the highly indexed facets, enhancing the current response to realize signal amplification. In view of the advantages of nanozyme labels and the involvement of gold nanoparticles (AuNPs, which behave as electrode materials) for the sensitive determination of AFP, the as-developed immunosensor could obtain a dynamic working range of 0.001 ng mL^−1–100.0 ng mL⁻¹ at a detection limit of 0.33 pg mL⁻¹ via DPV (at 3σ). Furthermore, the nanozyme-based electrochemical immunosensor exhibited remarkable analytical performance, which brought about feasible ideas for disease diagnosis in the future.     

Terpyridine Based Heteroleptic Ruthenium Complexes: Influence of Donor and Acceptor Ligands in Photosensitization

We report heteroleptic ruthenium complexes of terpyridine (tpy) ligands with directly linked carboxylic acid anchors. These complexes feature methyl or methoxy-substituted ^4′−Phtpy as donor ligands. We prepared these heteroleptic complexes from the ruthenium (II) precursor via a milder route to preclude the homoleptic complex formation. The donor−acceptor arrangement of tpy ligands in these ruthenium complexes renders visible light absorption giving metal and ligand-to-ligand charge transfer excitations at c.a. 490 nm. We evaluate the effect of the tpy donor substituents on the light-harvesting ability in Dye-Sensitized Solar Cells (DSSCs) and compare their photosensitizing ability with heteroleptic complexes bearing phenyl spacer at the acceptor end. Further, scrutinizing their photovoltaic performance, we studied their electron transfer kinetics in DSSCs using electrochemical impedance spectroscopy. This paper presents the structure-photosensitization relationship of these heteroleptic ruthenium complexes through a combined experimental and computational approach.     

锂离子电池正极材料LiNi0.5Co0.4Al0.1O2的合成与性能

采用高温固相法制备了锂离子电池正极材料LiNi_0.5Co_0.4Al_0.1O₂。采用X射线衍射(XRD)、傅里叶红外光谱(FTIR)、扫描电子显微镜(SEM)对材料的结构及表观形貌进行分析。通过恒电流充放电以及循环伏安法进行了电化学性能测试。测试结果表明,充放电电压在3~4.5 V之间,在0.2C倍率下首次放电比容量达到159.9 mAh·g^-1,经50次循环充放电后放电容量为142.6 mAh·g^-1,表现出良好的电化学性能。     

锂硫电池正极用硫/介孔碳复合材料的制备及电化学性能

制备了以十二烷基硫酸钠(SDS)为模板的介孔碳,并将介孔碳和单质硫采用熔融渗透法复合制得硫/介孔碳复合材料。SEM、TEM和BET结果显示介孔碳成直径约为500 nm的大小均一的球体,存在孔径为2 nm的微孔;单质硫充分填充在介孔碳的微孔中。以硫/介孔碳复合物作为锂硫电池正极材料时显示出高的电化学性能。初始放电容量高达1519 mAh·g^-1,在200 mA·g^-1的电流密度下充放电200个循环后依然能保持在835 mAh·g^-1。硫/介孔碳复合材料的高倍率性能和优异的循环稳定性,源于介孔碳良好的导电性及其孔结构的固硫作用。     

Non‐Covalent Functionalization of Graphene with Bisphenol A for High‐Performance Supercapacitors

The reduced graphene oxide (RGO)/bisphenol A (BPA) composites were prepared by an adsorption‐reduction method. The composites are characterized by X‐ray diffraction (XRD), UV‐vis, thermogravimetric (TG) analysis, field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM). The results confirm that BPA is adsorbed on the basal plane of RGO by π‐π stacking interaction. Furthermore, the electrochemical behaviors were evaluated by cyclic voltammetry, galvanostatic charge/discharge techniques and electrochemical impedance spectroscopy (EIS). The results show that the RGO/BPA nanocomposites exhibit ultrahigh specific capacitance of 466 F·g^?1 at a current density of 1 A·g^?1, excellent rate capability (more than 81% retention at 10 A·g^?1 relative to 1 A·g^?1) and superior cycling stability (90% capacitance decay after 4000 cycles). Consequently, the RGO/BPA nanocomposites can be regarded as promising electrode materials for supercapacitor applications.     

吡罗昔康在纳米Fe_3O_4-石墨烯复合修饰玻碳电极上的电化学行为及电分析研究

采用纳米Fe3O4粒子(nano-Fe3O4)和石墨烯(Reduced Graphene Oxide,RGO)制备了nano-Fe3O4-RGO复合材料修饰玻碳电极(nano-Fe3O4-RGO/GCE),采用循环伏安法(cyclic voltammetry,CV),方波伏安法(square wave voltammetry,SWV),计时电流法(chronoamperometry,CA),计时库仑法(chronocoulometry,CC)研究了吡罗昔康(Piroxicam,PC)在此复合修饰电极上的电化学行为及电化学动力学性质。实验结果表明,与GCE相比,nano-Fe3O4-RGO/GCE对PC的电化学氧化作用有显著的促进作用,其氧化峰电流显著增加;对各种实验条件进行了优化,测得峰电流Ipa与PC浓度在2.0×10-6~2.0×10-4mol·L-1范围内呈良好的线性关系,检出限(S/N=3)为5.3×10-7mol·L-1,加标回收率为100.0%~104.0%。该方法快速,灵敏,并将nano-Fe3O4-RGO/GCE用于市售吡罗昔康片剂的测定,结果符合定量测定要求。     

芬苯达唑在石墨烯与[Bupy]PF_6复合修饰碳糊电极上的电化学性质及电分析方法研究

本文研究了芬苯达唑(Fenbendazole,FBZ)在石墨烯(RGO)与离子液体(N-丁基吡啶六氟磷酸盐)复合修饰碳糊电极上的电催化氧化及电化学动力学性质。同时用CC法(计时库仑法)、计时电流法(CA)测定FBZ在RGO-[Bupy]PF6/CPE上的电极反应动力学参数,并用方波伏安法(SWV)测定FBZ氧化峰电流(Ip)与其浓度c在4.0×10-8~1.0×10-5mol·L-1范围内呈良好线性关系,线性回归方程为Ip(μA)=1.471+5220.78c(10-3mol·L-1),R=0.9995,检测限(S/N=3)为1.4×10-9mol·L-1,在此基础上用SWV法对FBZ片剂中FBZ含量进行了电化学定量测定,RSD在0.2%~0.9%之间,回收率在99.0%~101.4%之间。